Hobbywing/Tek Model eZRun-18A-L Brushless ESC for 1/18 Car (Sportful Race)
As taken from Hobbywing.com:
Quote:
Specification
1.1 Output: Continuous current 18A, burst current 50A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
1.3 BEC Output: 6V/1A.
1.4 Resistance: 0.01 Ohm.
1.5 Motor Supported: Sensorless Brushless Motor
1.6 Suitable Brushless Motor: 12T and > 12T
1.7 Suitable Car: 1/18 on-road or off-road cars / trucks for normal race or sportful race.
1.8 Size: 31.5mm(L) * 24mm(W) * 15mm(H).
1.9 Weight: 19g(Without wires)
Features
2.1 Compatible with all sonsorless brushless motor.
2.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
2.3 Excellent start-up, acceleration and linearity features.
2.4 With 2 running modes (Racing mode and Forward/Backward mode).
2.5 With 4 steps of maximum reverse force adjustment.
2.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
2.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
2.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.
2.10 Easily program with only one button and compatible with pocket-sized program card.
Available for purchase via:
http://www.rc-fever.com/hobbywing-ezrun ... -4035.html
[b]Hobbywing/Tek Model eZRun-18A-L Brushless ESC for 1/18 Car (Sportful Race)[/b]
[img]http://www.hobbywing.com/upload/car/eZRun-18A.jpg[/img]
As taken from Hobbywing.com:
[quote][b]Specification[/b]
1.1 Output: Continuous current 18A, burst current 50A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
1.3 BEC Output: 6V/1A.
1.4 Resistance: 0.01 Ohm.
1.5 Motor Supported: Sensorless Brushless Motor
1.6 Suitable Brushless Motor: 12T and > 12T
1.7 Suitable Car: 1/18 on-road or off-road cars / trucks for normal race or sportful race.
1.8 Size: 31.5mm(L) * 24mm(W) * 15mm(H).
1.9 Weight: 19g(Without wires)
[b]Features[/b]
2.1 Compatible with all sonsorless brushless motor.
2.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
2.3 Excellent start-up, acceleration and linearity features.
2.4 With 2 running modes (Racing mode and Forward/Backward mode).
2.5 With 4 steps of maximum reverse force adjustment.
2.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
2.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
2.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.
2.10 Easily program with only one button and compatible with pocket-sized program card.[/quote]
Available for purchase via:
http://www.rc-fever.com/hobbywing-ezrun-18a-l-brushless-esc-for-118-car-p-4035.html
